{"products":[{"id":8147674562638,"title":"OEM Style Intermediate Shaft Bearing 03-10 PT Cruiser Turbo","handle":"oem-style-intermediate-shaft-bearing-03-10-pt-cruiser-turbo","body_html":"\u003ch3 data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eMPx OEM-Style Intermediate Shaft Support Bearing – 2003–2010 Chrysler PT Cruiser Turbo\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eThe factory intermediate shaft support bearing on the 2003–2010 Chrysler PT Cruiser Turbo was \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enever available separately from Mopar\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. If the original bearing became worn or damaged, the only factory replacement option was to purchase the entire intermediate shaft assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModern Performance has developed an \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOEM-style replacement bearing assembly\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing owners to repair their existing intermediate shaft without replacing the entire assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eOEM-style design closely matching the original factory bearing assembly\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eFits all 2003–2010 Chrysler PT Cruiser models equipped with the 2.4L turbocharged engine\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eCompatible with both automatic and manual transmissions\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAllows reuse of your existing intermediate shaft\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDeveloped specifically to address the lack of a factory replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eLimited batch available\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe original bearing assembly must be removed, and the replacement \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emust be pressed onto the intermediate shaft\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Professional installation is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAvailability:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e We currently have a limited batch of these bearings in stock. Future availability is not guaranteed.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-10-16T12:18:04-05:00","created_at":"2026-10-16T12:18:03-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44567343595598,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"331174-BEARING-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"89.99","grams":397,"compare_at_price":null,"position":1,"product_id":8147674562638,"created_at":"2026-10-16T12:18:03-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":57862946717774,"created_at":"2026-10-16T12:22:16-05:00","position":1,"updated_at":"2026-10-16T12:22:18-05:00","product_id":8147674562638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/oemintermediateshaftbearing8.jpg?v=1792171338","width":800,"height":800},{"id":57862946750542,"created_at":"2026-10-16T12:22:16-05:00","position":2,"updated_at":"2026-10-16T12:22:18-05:00","product_id":8147674562638,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/oemintermediateshaftbearing7.jpg?v=1792171338","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8147471564878,"title":"OEM Style Intermediate Shaft Bearing 03-05 Neon SRT-4","handle":"oem-style-intermediate-shaft-bearing","body_html":"\u003cp data-pm-slice=\"1 1 []\"\u003e\u003cspan\u003eThe factory intermediate shaft support bearing on the 2003–2005 Dodge Neon SRT-4 was \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003enever available separately from Mopar\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. If the original bearing became worn or damaged, the only factory replacement option was to purchase the entire intermediate shaft assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModern Performance has developed an \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003eOEM-style replacement bearing assembly\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e, allowing owners to repair their existing intermediate shaft without replacing the entire assembly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProduct Features:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eOEM-style design closely matching the original factory bearing assembly\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDirect replacement for the 2003–2005 Dodge Neon SRT-4\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eAllows reuse of your existing intermediate shaft\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cspan\u003eDeveloped specifically to address the lack of a factory replacement\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eLimited batch available\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eInstallation Note:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe original bearing assembly must be removed, and the replacement \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003emust be pressed onto the intermediate shaft\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e. Professional installation is recommended.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eAvailability:\u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003e We currently have a limited batch of these bearings in stock. Future availability is not guaranteed.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-10-16T10:45:09-05:00","created_at":"2026-10-16T10:45:08-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44567066705998,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220179-BEAR-OEM","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"89.99","grams":397,"compare_at_price":null,"position":1,"product_id":8147471564878,"created_at":"2026-10-16T10:45:08-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":57856984219726,"created_at":"2026-10-16T11:22:23-05:00","position":1,"updated_at":"2026-10-16T11:22:25-05:00","product_id":8147471564878,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/oemintermediateshaftbearing6.jpg?v=1792167745","width":800,"height":800},{"id":57856984186958,"created_at":"2026-10-16T11:22:23-05:00","position":2,"updated_at":"2026-10-16T11:22:25-05:00","product_id":8147471564878,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/oemintermediateshaftbearing5.jpg?v=1792167745","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8095839617102,"title":"Mopar OEM 1995-1999 Neon Glow Key","handle":"mopar-oem-1995-1999-neon-glow-key","body_html":"\u003cp\u003eWe came across a limited batch of original, 1995-1999 Dodge\/Plymouth Neon glow keys. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are keys that would have come with the car from the factory, and are long since discontinued. Its difficult enough to find replacement black blank keys now, let alone these special glow keys. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are brand new, never cut, never used. You'll have to have a local locksmith cut the key (simple operation) to match your existing key. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are sold individually, price is for one key. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eOh, and YES, they actually glow in the dark after exposed to sunlight for a while. Check out our attached photos. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-09-28T15:23:39-05:00","created_at":"2026-09-28T15:23:38-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44422055002190,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"601661","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"price":"60.00","grams":85,"compare_at_price":null,"position":1,"product_id":8095839617102,"created_at":"2026-09-28T15:23:38-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":56795628240974,"created_at":"2026-09-28T15:20:10-05:00","position":1,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8095839617102,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1gneonglowkey1.jpg?v=1791654427","width":800,"height":800},{"id":56795628273742,"created_at":"2026-09-28T15:20:10-05:00","position":2,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8095839617102,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1gneonglowkey2.jpg?v=1791654427","width":800,"height":800},{"id":56795628208206,"created_at":"2026-09-28T15:20:10-05:00","position":3,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8095839617102,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1gneonglowkey3.jpg?v=1791654427","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7735446241358,"title":"Mopar Performance Stage 3 O2 Housing, 03-05 Neon SRT-4 (Not for use with stock turbo!!)","handle":"mopar-performance-stage-3-kit-o2-housing-03-05-neon-srt-4","body_html":"\u003cp\u003eTHIS WILL NOT WORK WITH THE STOCK TURBO!!!!! \u003cbr\u003e\u003cbr\u003eThis is the Mopar OEM Stage 3 Turbo cast o2 housing.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003ePerfect if you want to buy an extra one to port out to increase exhaust velocity out of your stage 3 kit!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eIf your piecing together your own Stage 3 turbo kit and need a genuine Stage 3 housing, this is it!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eGreat if your stage 3 o2 housing is cracked, or damaged.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eNote: Mopar discontinued these and we only have a few left!\u003c\/p\u003e","published_at":"2026-09-21T07:52:08-05:00","created_at":"2025-10-15T22:33:52-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"Exhaust","tags":["03-05 Dodge Neon SRT-4-Exhaust","03-05 Dodge Neon SRT-4-Turbo Upgrades \u0026 Accessories-Mopar Stage Kit Components"],"variants":[{"id":43042770878542,"title":"I HAVE THE STOCK TURBO - DO NOT BUY","option1":"I HAVE THE STOCK TURBO - DO NOT BUY","option2":null,"option3":null,"sku":"220247-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"price":"189.99","grams":4536,"compare_at_price":null,"position":1,"product_id":7735446241358,"created_at":"2025-10-15T22:37:53-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43042770911310,"title":"I HAVE A MOPAR STAGE 3 TURBO - YOU ARE OK TO BUY THIS","option1":"I HAVE A MOPAR STAGE 3 TURBO - YOU ARE OK TO BUY THIS","option2":null,"option3":null,"sku":"220247-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"189.99","grams":3175,"compare_at_price":null,"position":2,"product_id":7735446241358,"created_at":"2025-10-15T22:37:53-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":40515388833870,"created_at":"2025-12-01T18:57:20-06:00","position":1,"updated_at":"2025-12-18T21:47:06-06:00","product_id":7735446241358,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/748_2973_popup.jpg?v=1766116026","width":800,"height":800},{"id":40515388866638,"created_at":"2025-12-01T18:57:20-06:00","position":2,"updated_at":"2025-12-18T21:47:06-06:00","product_id":7735446241358,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mopar_s3o22.jpg?v=1766116026","width":800,"height":800}],"options":[{"name":"DO YOU HAVE A MOPAR STAGE 3 TURBO KIT? -","position":1,"values":["I HAVE THE STOCK TURBO - DO NOT BUY","I HAVE A MOPAR STAGE 3 TURBO - YOU ARE OK TO BUY THIS"]}]},{"id":7722597613646,"title":"PT\/GT Cruiser Mopar OEM Lower Radiator Crossmember","handle":"pt-gt-cruiser-mopar-oem-lower-radiator-crossmember","body_html":"\u003cdiv class=\"prod-desc\"\u003e\n\u003cp\u003eThis item is discontinued by Mopar and we only have one left in stock. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEvery PT\/GT Cruiser we have ever looked at\/seen has a mangled lower radiator cross member. It frequently gets bent, and mangled by curbs, big rocks, and road debris. A mangled lower radiator cross member can create some mounting or alignment issues with radiators and intercoolers.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eSo, we are now stocking the Mopar OEM cross member to fix your PT\/GT! These are superior to the aftermarket lower radiator cross members which seem to be weaker, and thinner than the OEM cross member.\u003c\/p\u003e\n\u003cbr\u003e\n\u003cp\u003eThis fits:\u003c\/p\u003e\n\u003cbr\u003eAll 2001-2010 Chrysler PT\/GT Cruisers\u003c\/div\u003e","published_at":"2026-09-16T11:25:42-05:00","created_at":"2025-10-06T04:11:32-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["01-10 Chrysler PT Cruiser - PT Cruiser Non-Turbo-Engine -Cooling System","01-10 Chrysler PT Cruiser-03-10 PT Cruiser Turbo-Engine-Cooling System","01-10 Chrysler PT Cruiser-03-10 PT Cruiser Turbo-Turbo Upgrades \u0026 Accessories"],"variants":[{"id":42985391128654,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"331231","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"279.99","grams":1814,"compare_at_price":null,"position":1,"product_id":7722597613646,"created_at":"2025-10-06T04:11:32-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":43202468151374,"created_at":"2025-12-27T09:00:18-06:00","position":1,"updated_at":"2025-12-30T17:14:17-06:00","product_id":7722597613646,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2661_9781_popup.jpg?v=1767136457","width":960,"height":960},{"id":43202468184142,"created_at":"2025-12-27T09:00:18-06:00","position":2,"updated_at":"2025-12-30T17:14:17-06:00","product_id":7722597613646,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2661_9782_popup.jpg?v=1767136457","width":960,"height":960}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7722500489294,"title":"Nyloc Rear Hub Nut, 95-05 Neon \/ 01-10 PT Cruiser","handle":"nyloc-rear-hub-nut-95-05-neon-01-10-pt-cruiser","body_html":"\u003cp\u003eOEM style Nyloc Rear Hub Nut for the 95-05 Neon, Neon SRT-4 \u0026amp; 01-10 PT Cruiser.\u003c\/p\u003e","published_at":"2026-09-14T09:59:08-05:00","created_at":"2025-10-05T22:53:00-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"Drivetrain","tags":["01-10 Chrysler PT Cruise- PT Cruiser Non-Turbo -Drivetrain","01-10 Chrysler PT Cruiser 03-10 PT Cruiser Turbo Drivetrain","03-05 Dodge Neon SRT-4-Drivetrain -Axles","95-05 Dodge-Plymouth Neon -95-99 Neon-Drivetrain -Axles","95-05 Dodge-Plymouth Neon-00-05 Neon-Drivetrain-Wheel Hubs","Bearings \u0026 Lug Nuts","Hubs","Wheel Bearings \u0026 Steering","Wheel Hubs \u0026 Lug Nuts"],"variants":[{"id":42984774205518,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221346-NYLOC","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"19.99","grams":454,"compare_at_price":null,"position":1,"product_id":7722500489294,"created_at":"2025-10-05T22:53:00-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":39277367853134,"created_at":"2025-11-25T10:28:49-06:00","position":1,"updated_at":"2025-11-29T13:59:36-06:00","product_id":7722500489294,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2295_10974_popup_568cca86-e98e-4791-9212-0e06a40e52c9.jpg?v=1764446376","width":800,"height":800},{"id":39277367885902,"created_at":"2025-11-25T10:28:49-06:00","position":2,"updated_at":"2025-11-29T13:59:36-06:00","product_id":7722500489294,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2295_10975_popup_e00b954e-b724-445f-90bf-3157ac5c077a.jpg?v=1764446376","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8061662068814,"title":"MPx Billet Shifter Cable Crossover End 1995-2010 Dodge Neon \/ SRT-4 \/ PT Cruiser","handle":"mpx-bcce","body_html":"\u003cp\u003eSince 1995, Chrysler has been using a plastic crossover cable end for their Neon\/PT\u003cbr\u003eshift cables (Shifter Side). Fast forward a few decades, and the plastic has hardened\u003cbr\u003eand become brittle. These are known to break causing a no shift problem.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eSo, to have a reliable and innovative solution to this problem, we have designed and\u003cbr\u003edeveloped a dual ball bearing billet aluminum crossover cable end with a new stainless\u003cbr\u003ebolt, shims, and safety locking clip to keep your car on the road reliably for many\u003cbr\u003edecades to come. These are the exact bearing cable ends we use on our newly\u003cbr\u003ereleased MPx shifter cables.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSince the crossover arm only goes forward and backwards, we use two fully sealed and\u003cbr\u003elubricated ball bearings instead of a bushing, pressed into a billet aluminum body, to\u003cbr\u003edeliver the smoothest, least friction, and most reliable and effortless shifting possible.\u003c\/p\u003e\n\u003cp\u003eFeatures;\u003cbr\u003e-6061-T6 Billet Aluminum Construction\u003cbr\u003e-Hard Anodized finish\u003cbr\u003e-Dual Sealed ball bearings\u003cbr\u003e-Stainless Steel Serrated Flange Head Bolt\u003cbr\u003e-Two Shims\u003cbr\u003e-One Safety Retaining Clip\u003cbr\u003e-3 Position Adjustable\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e-Wider Range of Adjustability for multiple applications\u003c\/p\u003e\n\u003cp\u003eFits;\u003cbr\u003e-1995-2005 Dodge\/Plymouth Neon\u003cbr\u003e-2003-2005 Dodge Neon SRT-4\u003cbr\u003e-2001-2010 Chrysler PT Cruiser Turbo and Non-Turbo\u003c\/p\u003e","published_at":"2026-09-11T14:46:53-05:00","created_at":"2026-09-11T14:46:52-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44312696586318,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220153-BCCE-BEAR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"44.99","grams":227,"compare_at_price":null,"position":1,"product_id":8061662068814,"created_at":"2026-09-11T14:46:52-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":55805620486222,"created_at":"2026-09-11T15:53:16-05:00","position":1,"updated_at":"2026-09-11T15:53:18-05:00","product_id":8061662068814,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxbcce6_d6a4484a-295a-4771-8272-2cda8b237325.jpg?v=1789159998","width":800,"height":800},{"id":55805620518990,"created_at":"2026-09-11T15:53:16-05:00","position":2,"updated_at":"2026-09-11T15:53:18-05:00","product_id":8061662068814,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxbcce5_c65a4505-df31-47d5-8e69-1479a0512d75.jpg?v=1789159998","width":800,"height":800},{"id":55805338615886,"created_at":"2026-09-11T15:45:22-05:00","position":3,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8061662068814,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxbcce7.jpg?v=1791654427","width":800,"height":800},{"id":55805338583118,"created_at":"2026-09-11T15:45:22-05:00","position":4,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8061662068814,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxbcce8.jpg?v=1791654427","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8060307800142,"title":"MPx Crankshaft\/Timing Gear\/Sprocket 03-05 Neon SRT-4 01-10 PT Cruiser","handle":"mpx-crankshaft-timing-gear-03-05-neon-srt-4-01-10-pt-cruiser","body_html":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eBack around 2022, Mopar discontinued the OEM crankshaft timing gear (part number 04648939AA) for the Neon SRT-4 and PT Cruiser. This gear is a critical engine component, as it drives the timing belt and must be removed whenever replacing the oil pump or front main seal, as well as during a full engine rebuild.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eUnfortunately, the original timing gear can sometimes be damaged during removal, and with new OEM replacements no longer available, owners needed a reliable replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis one took us quite a bit of time to release because we wanted to get it right. We tested multiple revisions of the gear and spent considerable time working with our machinist to determine the proper material, dimensions, and manufacturing process. Once we were happy with the design, we produced samples and put them through long-term testing on our own Neon SRT-4s as well as several local friends' cars.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOur replacement gear starts with chromium-molybdenum alloy steel that is precision CNC machined and then heat treated for additional strength and durability. The finished MPx gear is actually stronger than the original cast-iron OEM timing gear!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWe also designed it to function just like the factory part. It works with all timing belts, and your OEM-style timing gear puller can be used to remove it just as you would the original gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eFitment:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e2003–2005 Dodge Neon SRT-4\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e2001–2010 Chrysler PT Cruiser 2.4L — turbo and non-turbo\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e1995-2000 Chrysler\/Dodge Stratus\/Cirrus\/Breeze\/Caravan 2.4L engines\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis timing gear is a perfect replacement for Mopar's discontinued part number 04648939AA\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-09-10T12:24:20-05:00","created_at":"2026-09-10T12:08:15-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["#04648939AA"],"variants":[{"id":44306000543822,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220260","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"129.99","grams":544,"compare_at_price":null,"position":1,"product_id":8060307800142,"created_at":"2026-09-10T12:08:15-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":55752996618318,"created_at":"2026-09-10T12:34:52-05:00","position":1,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8060307800142,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxtimingcranksprocket6_85b908d5-ed5b-47c7-9a6d-b626e059483c.jpg?v=1791654427","width":800,"height":800},{"id":55752996585550,"created_at":"2026-09-10T12:34:52-05:00","position":2,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8060307800142,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxtimingcranksprocket5_6ccf46e9-1d90-4552-b805-8f61cb5df070.jpg?v=1791654427","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8058145505358,"title":"MPx OEM Replacement Shifter Cable (Transmission side) Retaining Clip, 95-05 Neon \/ 01-10 PT Cruiser","handle":"mopar-oem-shifter-cable-transmission-side-retaining-clip-95-05-neon-01-10-pt-cruiser","body_html":"\u003cp\u003eThese are the clips that secure the shifter cables to the transmission under the hood.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMopar discontinued these clips, so we worked to manufacture our own replacements so that we could keep our beloved Neon\/PT\/SRT-4's on the road! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are designed exactly like the OEM ones, made from stamped steel, with additional stamping ribs for superior strength. \u003c\/p\u003e\n\u003cp\u003e   \u003c\/p\u003e\n\u003cp\u003eThese will NOT WORK on the shifter side, inside the car. If you need the clips that are on the shifter side, inside the car, please see our other parts listing by searching for part number 220153-SHIFTCLIP-1\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFits the below vehicles with manual transmissions:\u003c\/p\u003e\n\u003cp\u003e1995-2005 Dodge Neon\u003c\/p\u003e\n\u003cp\u003e2003-2005 Dodge Neon SRT-4 \u003c\/p\u003e\n\u003cp\u003e2001-2010 Chrysler PT Cruiser\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe've also been told by Jackson Simler that builds a lot of 80's and 90's Chrysler transmissions that these clips will also fit many 19\u003cspan\u003e87-1995 Dodge cars with manual transmissions like the A520-555-523-543-568. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are sold as a pair. \u003c\/p\u003e","published_at":"2026-09-08T11:24:32-05:00","created_at":"2026-09-08T11:13:29-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44294125977678,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220153-TRANC-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"14.99","grams":113,"compare_at_price":null,"position":1,"product_id":8058145505358,"created_at":"2026-09-08T11:13:29-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":55659956961358,"created_at":"2026-09-08T11:59:03-05:00","position":1,"updated_at":"2026-09-08T11:59:05-05:00","product_id":8058145505358,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/neontransclips7_30cafb3d-1af2-4a27-9ab7-34dd422e21f2.jpg?v=1788886745","width":800,"height":800},{"id":55659956994126,"created_at":"2026-09-08T11:59:03-05:00","position":2,"updated_at":"2026-10-10T12:47:07-05:00","product_id":8058145505358,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/neontranscliips6_4961ce89-658a-4aac-a45c-39b5784b0a6e.jpg?v=1791654427","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8047029387342,"title":"MPx Shifter Cables 03-05 Neon SRT-4","handle":"mpx-shifter-cables-03-05-neon-srt-4","body_html":"\u003cp\u003eBack around 2019, Mopar discontinued the OEM shifter cables for the 2003–2005 Dodge Neon SRT-4.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThat meant if your original cables wore out or failed,\u003cspan\u003e \u003c\/span\u003eyou had to find a good used set of OEM cables\u003cu\u003e.\u003c\/u\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe decided the SRT-4 community needed a better option. Our goal was to develop a complete replacement cable set that fit and installed like the OEM cables, while also improving shift feel and making gear changes smoother and more precise.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter multiple revisions and extensive testing with different bushings and crossover\u003cspan\u003e \u003c\/span\u003eend link designs, we developed a combination that feels amazing in our test cars. Gear changes are buttery smooth, side-to-side movement in neutral feels excellent, and the shifter returns to center quickly and smoothly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan class=\"im\"\u003eComplete set of shifter cables from the transmission to the shifter\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBillet Aluminum Bushing Cable Ends (Stock is plastic)\u003c\/li\u003e\n\u003cli\u003eNew billet aluminum Dual Ball Bearing adjustable cable crossover end (shifter side)\u003c\/li\u003e\n\u003cli\u003eNew bushed steel rod end (shifter side)\u003c\/li\u003e\n\u003cli\u003eNew shifter bushings (transmission side)\u003c\/li\u003e\n\u003cli\u003e4 New Safety Locking retainer clips (Both sides)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan class=\"im\"\u003eIncludes new transmission-side and shifter-side retaining clips — (a $40 value) as well as OEM-style heat shielding\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAccordion style dust boots to keep debris and water out\u003c\/li\u003e\n\u003cli\u003eRubber through-cabin gasket for a superior seal to keep debris and water out\u003c\/li\u003e\n\u003cli\u003eReady to install, just swap over the 4 bolt steel floor retaining ring\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan class=\"im\"\u003eWorks with all Neon SRT-4 shifters, including OEM, Mopar Performance, Hurst, and other\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2026-09-04T12:01:24-05:00","created_at":"2026-09-01T14:10:24-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["#neonsrt4shiftercables"],"variants":[{"id":44259182870606,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220153-MPX-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"374.99","grams":1361,"compare_at_price":null,"position":1,"product_id":8047029387342,"created_at":"2026-09-01T14:10:24-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":55410891128910,"created_at":"2026-09-04T11:18:30-05:00","position":1,"updated_at":"2026-09-07T10:37:09-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables4.jpg?v=1788795429","width":800,"height":800},{"id":55323589869646,"created_at":"2026-09-02T16:12:04-05:00","position":2,"updated_at":"2026-09-07T10:37:09-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables6.jpg?v=1788795429","width":800,"height":800},{"id":55323589836878,"created_at":"2026-09-02T16:12:04-05:00","position":3,"updated_at":"2026-09-02T16:12:06-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables8.jpg?v=1788383526","width":800,"height":800},{"id":55410891161678,"created_at":"2026-09-04T11:18:30-05:00","position":4,"updated_at":"2026-09-07T10:37:09-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables9.jpg?v=1788795429","width":800,"height":800},{"id":55413363441742,"created_at":"2026-09-04T12:01:08-05:00","position":5,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables10.jpg?v=1788795430","width":800,"height":800},{"id":55413363408974,"created_at":"2026-09-04T12:01:08-05:00","position":6,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables11.jpg?v=1788795430","width":800,"height":800},{"id":55413363474510,"created_at":"2026-09-04T12:01:08-05:00","position":7,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables12.jpg?v=1788795430","width":800,"height":800},{"id":55413363507278,"created_at":"2026-09-04T12:01:08-05:00","position":8,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8047029387342,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxnsrt4shiftercables13.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":8034980757582,"title":"MPx Differential Pin Saver Retainer Bracket","handle":"mpx-differential-pin-saver-retainer-bracket","body_html":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eMopar discontinued the factory T350 differential pin saver brackets used in the Neon, non-turbo PT Cruiser, and several other Chrysler applications. Rather than simply reproduce the original part, we developed an improved replacement.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eImproved Design\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eOur brackets improve on the original Mopar design in two key areas:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eMore Material Around the Mounting Holes\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eWe've seen used factory brackets develop deformation around the bolt holes. Our design adds additional material in these areas for improved strength and load distribution.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003e16-Gauge T304 Stainless Steel\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eInstead of the mild steel used for the original Mopar brackets, ours are made from thicker 16-gauge T304 stainless steel for substantially greater strength, resistance to deformation, and excellent corrosion resistance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eEach bracket is \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003elaser cut and formed entirely in the USA.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eSold as a pair.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eConfirmed Fitment\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1995–2005 Dodge\/Plymouth Neon with T350 manual transmission\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2001–2010 Chrysler PT Cruiser Non-Turbo with T350 manual transmission\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e1995–1999 Mitsubishi Eclipse \/ Eagle Talon Non-Turbo with T350 manual transmission\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eVarious 1990s Dodge\/Chrysler\/Plymouth Stratus, Cirrus, Breeze, and Avenger models equipped with the T350 manual transmission\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eWhat Does a Differential Pin Saver Do?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eInside the differential, the spider gears rotate on a cross pin, also known as the differential pinion shaft. Under hard use, wheelspin, wheel hop, aggressive launches, or simply years of wear, the pin or its retaining mechanism can begin to move.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe differential pin saver provides a physical barrier that \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehelps prevent the differential pin from walking out of the carrier.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThis is important because if the pin moves far enough, it can contact the transmission case and potentially crack or punch through it. What starts as a differential problem can quickly result in fluid loss and a destroyed transmission.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eDifferential pin moves → contacts transmission case → cracks the case → transmission fluid is lost → potentially catastrophic transmission damage.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eThe pin saver does not strengthen the spider gears themselves. Its job is to \u003c\/span\u003e\u003cstrong\u003e\u003cspan\u003ehelp contain the differential pin and prevent it from escaping the carrier if the factory retention system fails.\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt's inexpensive insurance, particularly for vehicles that experience increased horsepower, aggressive launches, burnouts, wheel hop, racing, hard street use, or simply have an older, high-mileage differential.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-08-21T13:52:51-05:00","created_at":"2026-08-21T13:52:50-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":44205673971790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221181-PINBRKT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"34.99","grams":113,"compare_at_price":null,"position":1,"product_id":8034980757582,"created_at":"2026-08-21T13:52:50-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":54638985347150,"created_at":"2026-08-21T14:45:55-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8034980757582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxt350diffsaverbracket6.jpg?v=1788795430","width":800,"height":800},{"id":54638985281614,"created_at":"2026-08-21T14:45:55-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8034980757582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxt350diffsaverbracket8.jpg?v=1788795430","width":800,"height":800},{"id":54638985314382,"created_at":"2026-08-21T14:45:55-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8034980757582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxt350diffsaverbracket7.jpg?v=1788795430","width":800,"height":800},{"id":54638985379918,"created_at":"2026-08-21T14:45:55-05:00","position":4,"updated_at":"2026-09-07T10:37:10-05:00","product_id":8034980757582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/moparvsmpxdiffsaverbracket.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7853817397326,"title":"Spherical Ball Joint Lower Control Arms w\/ Upgraded Bushings, 00-05 Neon\/SRT-4\/ 01-","handle":"spherical-ball-joint-lower-control-arms-w-upgraded-bushings-00-05-neon-srt-4-01-10-pt-cruiser","body_html":"\u003cp\u003eThere are two types of vertical bushings used in control arms where the control arm mounts to the K Frame. There are normal type rubber bushings which work fine, and then there are spherical ball joint bushings which are superior. Spherical bearings last longer and have a more fluid movement than a bolt through a rubber bushing. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFrom roughly 2007-2022 roughly, we could get Moog control arms with spherical bushings. Then, Moog discontinued the control arms and the separately sold spherical bushing. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIn 2026, we were able to find a small batch of the spherical ball joints, and so we then took those spherical ball joints along with new Moog regular control arms, and we burned out the bushings, pressed in the spherical ball joints and lastly we put in new Prothane horizontal urethane bushings for better cornering and handling.  \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWe have about 14 pairs of these control arms ready to go, and once they are sold out, we likely may never get more spherical ball joint control arms in again. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTech discussion about spherical bushings:\u003c\/p\u003e\n\u003ch3\u003e1. Zero Deflection\u003c\/h3\u003e\n\u003cp\u003eStandard rubber bushings \"squish\" under load. When you turn the steering wheel or hit the brakes, the rubber compresses before the car actually reacts. Spherical joints are metal-on-metal (usually with a PTFE\/Teflon liner).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eThe Benefit:\u003c\/b\u003e There is no \"give.\" Your suspension geometry remains exactly where it’s supposed to be, leading to much more predictable handling and razor-sharp steering response.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003e2. Greater Range of Motion \u003c\/h3\u003e\n\u003cp\u003eTraditional bushings rely on the twisting of rubber, which can bind if the suspension travels too far. Spherical joints allow the control arm to pivot freely in multiple planes without resistance.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eThe Benefit:\u003c\/b\u003e This prevents \"suspension binding,\" allowing the springs and shocks to do 100% of the work. It’s especially crucial for off-road vehicles or lowered track cars where extreme angles are common.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003ch3\u003e3. Improved Alignment Stability\u003c\/h3\u003e\n\u003cp\u003eBecause the joint doesn't move laterally, your \u003cb\u003ecamber\u003c\/b\u003e and \u003cb\u003ecaster\u003c\/b\u003e settings stay consistent even under heavy cornering loads.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eThe Benefit:\u003c\/b\u003e You get a more consistent \"contact patch\" (the amount of tire touching the road), which results in better grip and more even tire wear during spirited driving.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e \u003c\/h3\u003e\n\u003ch3\u003e4. Direct Road Feel\u003c\/h3\u003e\n\u003cp\u003eSince there is no rubber to dampen the vibrations, the \"conversation\" between the tires and your hands is much louder.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003e\u003cb\u003eThe Benefit:\u003c\/b\u003e You can feel exactly when the tires are about to lose traction. (Note: This is a \"pro\" for racers, but a \"con\" for daily drivers who want a silent, soft ride!)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-08-19T10:59:43-05:00","created_at":"2026-03-19T10:35:55-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":43535149924430,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221321-FCA-KIT-Spherical","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"459.99","grams":9072,"compare_at_price":null,"position":1,"product_id":7853817397326,"created_at":"2026-03-19T10:35:55-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":47448043126862,"created_at":"2026-03-19T10:44:45-05:00","position":1,"updated_at":"2026-09-07T10:37:11-05:00","product_id":7853817397326,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/sphericalbushingcontrolarms7.jpg?v=1788795431","width":800,"height":800},{"id":47448043159630,"created_at":"2026-03-19T10:44:45-05:00","position":2,"updated_at":"2026-09-07T10:37:11-05:00","product_id":7853817397326,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/sphericalbushingcontrolarms6.jpg?v=1788795431","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7991547134030,"title":"PWERKS Synchronizer Ball Bearings","handle":"pwerks-synchronizer-ball-bearings","body_html":"\u003cp\u003eThis is a set of 3 stainless steel synchro ball bearings. Fits the 1\/2, 3\/4 or 5\/R synchro assemblies. Sold as sets of 3, so order quantity of 3 to rebuild all 3 of your synchro assemblies.\u003c\/p\u003e","published_at":"2026-07-23T08:51:40-05:00","created_at":"2026-07-23T08:51:39-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["03-05 Dodge Neon SRT-4-Drivetrain-Transmission"],"variants":[{"id":44071197179982,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220169-PA-BALLBE","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"4.50","grams":113,"compare_at_price":null,"position":1,"product_id":7991547134030,"created_at":"2026-07-23T08:51:39-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7986635735118,"title":"Intermediate Shaft Bearing Housing with ARP Studs 03-10 PT Cruiser\/Automatic\/Manual","handle":"intermediate-shaft-bearing-housing-01-10-pt-cruiser-automatic-manual","body_html":"\u003cp data-start=\"159\" data-end=\"384\"\u003eWhen Mopar discontinued the intermediate shaft for the PT Cruiser, they didn’t just kill a part—they created a problem. No replacement bearing, no service option… just the hope that you could track down a worn-out used shaft.\u003c\/p\u003e\n\u003cp data-start=\"159\" data-end=\"384\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"418\" data-end=\"616\"\u003eWe have created a bearing housing from scratch to fill this void, and help keep PT Cruisers on the road. This bearing allows you to replace the worn out OEM bearing with a more solid part, eliminating noise and vibrations you may have. \u003c\/p\u003e\n\u003cp data-start=\"418\" data-end=\"616\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"418\" data-end=\"616\"\u003eFits all turbo 2.4L 2003-2010 Chrysler PT Cruisers, both automatic and manual. \u003c\/p\u003e\n\u003cp data-start=\"418\" data-end=\"616\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"712\" data-end=\"1026\"\u003eMachined from high-grade billet aluminum and finished in a durable silver anodizing, this housing is built to handle real-world abuse while maintaining a clean, OEM+ appearance. Each unit comes fully equipped with ARP studs, extra-thick washers, and tall flanged nuts for maximum clamping strength and reliability.\u003c\/p\u003e\n\u003cp data-start=\"712\" data-end=\"1026\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"712\" data-end=\"1026\"\u003eWe're also using a high-quality bearing with the same inner diameter as the OEM unit, but with a 15% larger outer diameter for increased load capacity, improved durability, and extended service life. The larger bearing design also reduces deflection and offers greater resistance to shock loads.\u003c\/p\u003e\n\u003cp data-start=\"712\" data-end=\"1026\"\u003e \u003c\/p\u003e\n\u003cp data-start=\"1028\" data-end=\"1199\"\u003eThe MPx intermediate shaft bearing is designed to be pressed onto your OEM intermediate shaft and is fully compatible with the factory bearing bracket.\u003c\/p\u003e","published_at":"2026-07-21T11:34:49-05:00","created_at":"2026-07-21T11:34:48-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["01-10 Chrysler PT Cruiser 03-10 PT Cruiser Turbo Drivetrain"],"variants":[{"id":44037715689550,"title":"Manual","option1":"Manual","option2":null,"option3":null,"sku":"331173-BEARING-K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"119.99","grams":907,"compare_at_price":null,"position":1,"product_id":7986635735118,"created_at":"2026-07-21T13:50:01-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":44037715722318,"title":"Automatic","option1":"Automatic","option2":null,"option3":null,"sku":"331173-BEARING-K-2","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"119.99","grams":907,"compare_at_price":null,"position":2,"product_id":7986635735118,"created_at":"2026-07-21T13:50:01-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":53038469873742,"created_at":"2026-07-21T11:32:23-05:00","position":1,"updated_at":"2026-07-21T11:32:24-05:00","product_id":7986635735118,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/intermediateshaftbearingptcruiser5.jpg?v=1784651544","width":800,"height":800},{"id":53045541240910,"created_at":"2026-07-21T13:16:59-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7986635735118,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/intermediateshaftbearingptcruiser8.jpg?v=1788795430","width":800,"height":800},{"id":53045577646158,"created_at":"2026-07-21T13:18:12-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7986635735118,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/intermediateshaftbearingptcruiser9.jpg?v=1788795430","width":1254,"height":1254}],"options":[{"name":"Transmission type","position":1,"values":["Manual","Automatic"]}]},{"id":7981420249166,"title":"AMMfab Ported SHORT Runner Manifold, 95-99 Neon SOHC","handle":"ammfab-ported-short-runner-manifold-95-99-neon-sohc","body_html":"\u003cp\u003eIf you have a 95-99 Neon with a 2.0L SOHC engine with a turbocharger, or super high compression, this is the manifold to get. We offer another manifold for 2.0 Sohc's that is a long runner type for non turbo use, this manifold is the short runner type. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis manifold will make a lot more power than your stock sohc manifold because it eliminates the sharp 90 degree bend under the throttle body. It also is thoroughly hand ported to smooth out the interior, maximizing air flow into the engine.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThese are made out of RARE early 1995 Aluminum stock 2.0 manifolds (almost all 95-99 Neon sohc manifolds are plastic!) that are cut, and then welded to new lower aluminum manifolds. They can be used with stock throttle bodies however you really should use a ported stock, or a 60mm tb with this. You'll also need the longer 98\/99 Neon throttle cable for this as well. The Mopar 98-99 longer throttle cables are discontinued so you'll need to buy a used one or find one in the junkyard.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eEach manifold is pressure washed so they are totally clean of oil, debris, and the mating surface to the head is planed so its true and wont leak.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNo tuning needed, bolt it on!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eMap sensor location is on the back of the manifold\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eOther vacuum ports on back of manifold for your other vacuum needs. Either use a brass nipple from a hardware store, or block off unused ones.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eReady to install, just buy a new intake manifold gasket for a 95 SOHC, as these do not use the rubber O rings on the 96-99 SOHC's!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eNo core needed, buy this manifold outright!\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eAMM can take a LONG time to make these, this current batch took almost 1. 5 years from when we sent them to him for us to receive. So, its kind of a big deal for us to have these in stock. If you ever wanted to get one of these, and don't want to wait 1.5-2 years to get one done, this is your chance.\u003c\/p\u003e","published_at":"2026-07-17T12:22:41-05:00","created_at":"2026-07-17T12:22:41-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["95-05 Dodge-Plymouth Neon-95-99 Neon-2.0L Engine Components-Throttle Body \u0026 Intake Manifold"],"variants":[{"id":44016984883278,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221115-AMMFABSOHCSHORT","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"price":"859.99","grams":6804,"compare_at_price":null,"position":1,"product_id":7981420249166,"created_at":"2026-07-17T12:22:41-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":52800003080270,"created_at":"2026-07-17T13:23:30-05:00","position":1,"updated_at":"2026-07-17T13:23:31-05:00","product_id":7981420249166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/ammfabsohcshortrunner6.jpg?v=1784312611","width":800,"height":800},{"id":52800115015758,"created_at":"2026-07-17T13:25:31-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7981420249166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/ammfabsohcshortrunner9.jpg?v=1788795430","width":800,"height":800},{"id":52800003014734,"created_at":"2026-07-17T13:23:30-05:00","position":3,"updated_at":"2026-07-17T13:23:31-05:00","product_id":7981420249166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/ammfabsohcshortrunner8.jpg?v=1784312611","width":800,"height":800},{"id":52800003047502,"created_at":"2026-07-17T13:23:30-05:00","position":4,"updated_at":"2026-07-17T13:23:31-05:00","product_id":7981420249166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/ammfabsohcshortrunner7.jpg?v=1784312611","width":800,"height":800},{"id":52800003113038,"created_at":"2026-07-17T13:23:30-05:00","position":5,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7981420249166,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/ammfabsohcshortrunner5.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7969100693582,"title":"Coverlay Upper Dash Cover 2000-2005 Dodge Neon\/SRT-4","handle":"coverlay-upper-dash-cover-2000-2005-dodge-neon-srt-4","body_html":"\u003cp\u003eIts getting difficult to find 2000-2005 Neon\/SRT-4 OEM dash pads that are not cracked and falling apart. So if you have a second gen Neon or Neon SRT-4 that you are proud of, this is likely a concern of yours like it is for us. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter looking into this for a while, we were able to find a company that makes a dash cover that installs over top of your OEM dash pad. It has a nice texture to it that matches the OEM dash pad, and we've been able to get a color that matches almost perfectly to the OEM color. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEven if you have large holes or cracks in your OEM dash pad, as long as the majority of it is solid, then this will mount over top of it, and make your dash look perfect again. Plus, after installation you can still remove this\/OEM dash pad like before. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have taken photos of the actual dash cover installed into our 2005 Dodge Neon SRT-4 ACR. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eBelow is text of how we installed a dash cover into our 1998 Neon R\/T. \u003c\/p\u003e\n\u003cp\u003eDuring the install process we removed the OEM dash pad, and we found several clips that were broken off the dash pad and stuck in the dash. We used the supplied silicone adhesive to glue the broken clips back onto the dash pad, and then we cleaned the OEM dash pad and aftermarket dash cover with ammonia based window cleaner. Next we ran a bead of silicone around the outer perimeter, around the tweeter holes, and defroster vents. Then we installed the cover onto the OEM dash pad, and laid out microfiber towels and some weights on the dash to hold it down while the silicone dries. About 8 hours are needed for the silicone to fully cure and lock the OEM dash pad to the new Aftermarket dash cover. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease note that if your tweeter, or defrost grille is missing from your existing dash, it will be open after installing this cover. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese can only be shipped within the continental USA, with a flat $40 shipping rate. These are shipped in a huge box to your doorstep. They are made to order, and generally take about two weeks after you place an order to be delivered. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube of silicone adhesive is included with each dash cover. \u003c\/li\u003e\n\u003cli\u003eWe are offering this in a Dark Gray color, photos posted are of the Dark Gray color.\u003c\/li\u003e\n\u003cli\u003e100% made in the USA\u003c\/li\u003e\n\u003cli\u003eMade from durable ABS plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-07-08T15:46:23-05:00","created_at":"2026-07-07T11:54:13-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":43940900110414,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220515","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"234.99","grams":4536,"compare_at_price":null,"position":1,"product_id":7969100693582,"created_at":"2026-07-07T11:54:13-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":52409374441550,"created_at":"2026-07-08T15:43:36-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969100693582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/0005neondashcover3.jpg?v=1788795430","width":800,"height":800},{"id":52409374474318,"created_at":"2026-07-08T15:43:36-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969100693582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/0005neondashcover4.jpg?v=1788795430","width":1448,"height":1086},{"id":52409374507086,"created_at":"2026-07-08T15:43:36-05:00","position":3,"updated_at":"2026-07-08T15:43:37-05:00","product_id":7969100693582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/0005neondashcover5.jpg?v=1783543417","width":800,"height":800},{"id":52409374539854,"created_at":"2026-07-08T15:43:36-05:00","position":4,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969100693582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/0005neondashcover6.jpg?v=1788795430","width":800,"height":800},{"id":52409374572622,"created_at":"2026-07-08T15:43:36-05:00","position":5,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969100693582,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/0005neondashcover7.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7969101611086,"title":"Coverlay 1995-1999 Dodge\/Plymouth Neon Dash Cover","handle":"coverlay-dash-cover-1995-1999-dodge-plymouth-neon","body_html":"\u003cp\u003eIts getting difficult to find first gen 1995-1999 OEM dash pads that are not cracked and falling apart. So if you have a first gen Neon that you are proud of, this is likely a concern of yours like it is for us. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter looking into this for a while, we were able to find a company that makes a dash cover that installs over top of your OEM dash pad. It has a nice texture to it that matches the OEM dash pad, and we've been able to get a color that matches almost perfectly to the OEM color. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEven if you have large holes or cracks in your OEM dash pad, as long as the majority of it is solid, then this will mount over top of it, and make your dash look perfect again. Plus, after installation you can still remove this\/OEM dash pad like before. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe have taken photos of the actual dash cover installed into our 1998 Neon R\/T Sedan.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eDuring the install process we removed the OEM dash pad, and we found several clips that were broken off the dash pad and stuck in the dash. We used the supplied silicone adhesive to glue the broken clips back onto the dash pad, and then we cleaned the OEM dash pad and aftermarket dash cover with ammonia based window cleaner. Next we ran a bead of silicone around the outer perimeter, around the tweeter holes, and defroster vents. Then we installed the cover onto the OEM dash pad, and laid out microfiber towels and some weights on the dash to hold it down while the silicone dries. About 8 hours are needed for the silicone to fully cure and lock the OEM dash pad to the new Aftermarket dash cover. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003ePlease note that if your tweeter, or defrost grille is missing from your existing dash, it will be open after installing this cover. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese can only be shipped within the continental USA, with a flat $40 shipping rate. These are shipped in a huge box to your doorstep. They are made to order, and generally take about two weeks after you place an order to be delivered. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTube of silicone adhesive is included with each dash cover. \u003c\/li\u003e\n\u003cli\u003eWe are offering this in either 95-96 Neon Light Gray, or 97-99 Neon Dark Gray color. The dark gray is shown on this product page. \u003c\/li\u003e\n\u003cli\u003e100% made in the USA\u003c\/li\u003e\n\u003cli\u003eMade from durable ABS plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2026-07-08T14:00:44-05:00","created_at":"2026-07-07T11:55:04-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["95-99-neon-interior-gauges"],"variants":[{"id":43946551738446,"title":"1995-1996 Light Gray","option1":"1995-1996 Light Gray","option2":null,"option3":null,"sku":"221526-LG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"234.99","grams":4536,"compare_at_price":null,"position":1,"product_id":7969101611086,"created_at":"2026-07-08T14:44:49-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43946551771214,"title":"1997-1999 Dark Gray","option1":"1997-1999 Dark Gray","option2":null,"option3":null,"sku":"221526-DG","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"234.99","grams":4536,"compare_at_price":null,"position":2,"product_id":7969101611086,"created_at":"2026-07-08T14:44:49-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":52404536180814,"created_at":"2026-07-08T13:36:15-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969101611086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9599neondashcover5.jpg?v=1788795430","width":800,"height":800},{"id":52404536279118,"created_at":"2026-07-08T13:36:15-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969101611086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9599neondashcover8.jpg?v=1788795430","width":800,"height":800},{"id":52404536311886,"created_at":"2026-07-08T13:36:15-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969101611086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9599neondashcover9.jpg?v=1788795430","width":800,"height":800},{"id":52404536213582,"created_at":"2026-07-08T13:36:15-05:00","position":4,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969101611086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9599neondashcover6.jpg?v=1788795430","width":800,"height":800},{"id":52404536246350,"created_at":"2026-07-08T13:36:15-05:00","position":5,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969101611086,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9599neondashcover7.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Choose year ","position":1,"values":["1995-1996 Light Gray","1997-1999 Dark Gray"]}]},{"id":7969062813774,"title":"Deluxe Dash Cover, 95-99 Neon","handle":"deluxe-dash-cover-95-99-neon","body_html":"\u003cp\u003eHelp protect your dash from UV damage, or cover up your damaged first gen Neon dash! \u003cbr\u003e\u003cbr\u003eThis dash pad is custom cut and molded to fit the 95-99 Neon dash perfectly, and is held in place with velcro so that it wont be sliding around, but yet you can remove it if needed.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eHoles are cut for all defrost vents and AC vents, and flaps are made with the cover so it will not affect the airbag operation. \u003c\/p\u003e\n\u003cp\u003eThe before and after photos were taken on one of our MP employees Neons, so you can see exactly what it looks like. We are not providing generic photos of the covers like most other sellers of dash covers!\u003c\/p\u003e","published_at":"2026-07-07T11:18:26-05:00","created_at":"2026-07-07T11:18:25-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["95-05 Dodge-Plymouth Neon-95-99 Neon-Interior \u0026 Gauges-Interior","95-99-neon-interior-gauges"],"variants":[{"id":43940819238990,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"221525","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"58.99","grams":680,"compare_at_price":null,"position":1,"product_id":7969062813774,"created_at":"2026-07-07T11:21:56-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":52354486894670,"created_at":"2026-07-07T11:14:45-05:00","position":1,"updated_at":"2026-09-07T10:37:09-05:00","product_id":7969062813774,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2340_8307_popup.jpg?v=1788795429","width":720,"height":479},{"id":52354488303694,"created_at":"2026-07-07T11:14:51-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969062813774,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2340_8308_popup.jpg?v=1788795430","width":720,"height":479},{"id":52354488598606,"created_at":"2026-07-07T11:14:55-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7969062813774,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2340_8309_popup.jpg?v=1788795430","width":720,"height":479}],"options":[{"name":"Choose Color","position":1,"values":["Black"]}]},{"id":7717183291470,"title":"MPx Short Throw Shifter w\/ Angle Correction, 2013-16 Dart","handle":"mpx-short-throw-shifter-w-angle-correction-2013-16-dart","body_html":"\u003cp\u003eAll of you who own a manual Dodge Dart know the shifter has the following problems:\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe knob is positioned too far forward, and you have to reach to get to all forward gears. The throw feels too long between gears.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe've fixed these problems with the new MPx Short Throw Shifter!\u003cbr\u003e\u003cbr\u003e1) We've positioned the knob closer to the driver for better ergonomics and feel.\u003cbr\u003e2) We've reduced the throw between gears by 25%.\u003cbr\u003e3) We've reduced the height of the shifter to make it not feel so tall\u003cbr\u003e4)This retains the stock shift knob, and reverse lockout feature.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eNotice: We now offer the MPx shifter base bushings as an accessory, you dont have to buy these, but if you are installing this short shifter its the perfect time to install the base bushings.\u003c\/p\u003e\n\u003cp\u003e \u003cbr\u003eHere are pics of the stock shifter versus the MPx short shifter with angle correction.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/dart_mpxshifterbeforeandafter.jpg?v=1765314882\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/dart_mpxshifterbeforeandafter2.jpg?v=1765314916\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWith this shifter you will receive detailed photo installation instructions as well.\u003c\/p\u003e\n\u003cp\u003eNOTE: If you are purchasing a new lockout cable with this, please be sure to have our MPx shift knob or an updated Mopar shift knob that we sell as well.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eModern Performance is the Dart expert!\u003c\/p\u003e\n\u003cp\u003eModern Performance has been in business since 1997. Since the late 1990's, we have developed, and carried in stock parts for Chrysler 4 cylinder cars. We are Dart experts, as we have owned two Darts since 2013\/2014, one being a 1.4 Turbo, and the other a 2.4 GT. Our warehouse is located in Houston Texas, and we stock tons of product for same day shipping. We hope we can help you with your Dart parts needs soon!\u003c\/p\u003e","published_at":"2026-07-02T08:45:55-05:00","created_at":"2025-09-30T00:17:14-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["13-16 Dodge Dart - 2.0L - Drivetrain","13-16 Dodge Dart - 2.4L-Drivetrain","13-16 Dodge Dart -1.4L Turbo- Drivetrain"],"variants":[{"id":42962988630094,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"226150","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"price":"134.99","grams":907,"compare_at_price":null,"position":1,"product_id":7717183291470,"created_at":"2025-09-30T00:17:14-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":36276310802510,"created_at":"2025-10-23T13:38:40-05:00","position":1,"updated_at":"2025-11-06T22:16:01-06:00","product_id":7717183291470,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/1366_6237_popup.jpg?v=1762488961","width":720,"height":479},{"id":36276383744078,"created_at":"2025-10-23T13:40:04-05:00","position":2,"updated_at":"2025-11-06T22:16:01-06:00","product_id":7717183291470,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/Dart_2013Mpshifter_f2e59182-9ba8-489a-9288-3648f98b2060.jpg?v=1762488961","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7955691601998,"title":"TurboXS High Performance Boost Controller","handle":"turboxs-high-performance-boost-controller","body_html":"\u003csection id=\"wrapper\"\u003e\n\u003cdiv class=\"container\"\u003e\n\u003cdiv id=\"content-wrapper\"\u003e\n\u003csection id=\"main\" itemscope=\"\" itemtype=\"https:\/\/schema.org\/Product\"\u003e\n\u003cdiv class=\"col-xs-12\"\u003e\n\u003cdiv class=\"row\"\u003e\n\u003cdiv class=\"tabs\"\u003e\n\u003cdiv class=\"tab-content\" id=\"tab-content\"\u003e\n\u003cdiv class=\"tab-pane fade in active\" id=\"description\"\u003e\n\u003cdiv class=\"product-description\"\u003e\n\u003cp\u003eUtilizing a uniquely engineered ball\/spring mechanism combine with an adjustable bleed valve, the BC-HPBC allows you to spool your turbo to full boost up to hundreds of RPM faster than stock! The adjustable bleed mechanism lets you minimize the massive boost \"spike\" that can occur with poorly designed ball\/spring manual boost controllers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"js-ps_checkout-express-button-container\"\u003e\u003c\/div\u003e\n\u003cfooter class=\"page-footer\"\u003e\u003c\/footer\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e","published_at":"2026-06-29T09:04:54-05:00","created_at":"2026-06-29T09:04:53-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["03-05 Dodge Neon SRT-4-Turbo Upgrades \u0026 Accessories-Boost Controllers \u0026 Turbo Timers","08-09 Dodge Caliber SRT-4-Turbo Upgrades \u0026 Accessories-Boost Controllers"],"variants":[{"id":43904741670990,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"601132","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"176.20","grams":0,"compare_at_price":null,"position":1,"product_id":7955691601998,"created_at":"2026-06-29T09:04:53-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":52002821439566,"created_at":"2026-06-29T09:02:23-05:00","position":1,"updated_at":"2026-09-07T10:37:09-05:00","product_id":7955691601998,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/2dc7c633e0a6f030a3a38eeee59b83a4.jpg?v=1788795429","width":420,"height":493}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7953660936270,"title":"MPx Synchro Slider Ring T-850 Transmission 03-05 Neon SRT-4","handle":"mpx-synchro-slider-ring-t-850-transmission-03-05-neon-srt-4","body_html":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eMopar never sold the synchro sliders separately, sliders only came as an assembly with synchronizer sets, and they were expensive. Then after Mopar discontinued the synchronizer sets, there were no more new sliders available. This left Neon SRT-4 owners with one less critical component for repairing the T-850 transmission. We spent considerable time developing, manufacturing, and testing a high-quality replacement to help keep these cars on the road.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAfter producing our prototypes, we installed and tested them in our own Neon SRT-4. We immediately noticed smoother and more positive engagement into gear, giving us the confidence that these were ready for production.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eIf your transmission is becoming difficult to shift, feels notchy when engaging a gear, or grinds during shifts, a worn or damaged synchro slider may be part of the problem. Over time, the engagement teeth can wear, making it harder for the transmission to smoothly lock the selected gear to the shaft.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eProducing these synchro sliders required a substantial investment and a large production run, but we felt it was important to ensure this critical transmission component remained available for the Neon SRT-4 community. Our goal is simple: to help keep these cars on the road and shifting like they should.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eManufactured to OEM specifications for proper fit and function, these synchro sliders are designed as a direct replacement with no modifications required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e\u003cstrong\u003eThese are sold individually\u003c\/strong\u003e. One slider is needed for each synchro assembly. IE:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e1\/2 gear synchro\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e3\/4 gear synchro\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003e5\/R gear synchro\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eSo if you have a problem with third gear, you'd order one slider for the 3\/4 gear synchro assembly. Or if you are refreshing the transmission and want all new sliders, then you'd get three units for the entire 1\/2\/3\/4\/5\/R gears. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003e\u003cspan\u003eFits:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\n\u003cspan\u003e2003–2005 Dodge Neon SRT-4\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\n\u003cspan\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ch3\u003e\u003cspan\u003eWhat does a synchro slider do?\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA synchro slider is responsible for locking the selected gear to the transmission shaft after the synchronizer has matched the gear speeds. Without it, the transmission cannot smoothly engage the selected gear.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eA simple analogy:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eImagine two merry-go-rounds spinning at different speeds. If you tried to connect them together instantly, they would crash into each other—that's gear grinding. The synchronizer first brings both to the same speed, then the synchro slider locks them together for a smooth gear change.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eCommon symptoms of a worn synchro slider\u003c\/span\u003e\u003c\/h3\u003e\n\u003cul data-spread=\"false\"\u003e\n\u003cli\u003e\u003cspan\u003eGrinding while shifting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eDifficulty engaging a specific gear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eExcessive resistance when shifting\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTransmission popping out of gear\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eRounded or chipped engagement teeth\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eHard or notchy shifting, especially during aggressive driving\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhile worn synchronizer rings are often blamed for shifting problems, the synchro slider itself is also a common wear item. As the engagement teeth become rounded over time, smooth gear engagement becomes increasingly difficult.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-06-26T11:23:09-05:00","created_at":"2026-06-26T11:23:08-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["03-05 Dodge Neon SRT-4-Drivetrain-Transmission"],"variants":[{"id":43899063500878,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220169-SLIDER","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"169.99","grams":386,"compare_at_price":null,"position":1,"product_id":7953660936270,"created_at":"2026-06-26T11:23:08-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":51902207787086,"created_at":"2026-06-26T13:50:13-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7953660936270,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxsynchrosliders1.jpg?v=1788795430","width":800,"height":800},{"id":51902207819854,"created_at":"2026-06-26T13:50:13-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7953660936270,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxsynchrosliders2.jpg?v=1788795430","width":800,"height":800},{"id":51902207852622,"created_at":"2026-06-26T13:50:13-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7953660936270,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxsynchrosliders3.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7953058988110,"title":"Neon SRT-4 ACR Replacement Stickers","handle":"neon-srt-4-acr-replacement-stickers","body_html":"\u003cp\u003eOnly \u003cstrong\u003e1,175 Neon SRT-4 ACRs\u003c\/strong\u003e were produced for the 2005 model year, making the ACR one of the rarest and most desirable versions of the Neon SRT-4.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eIf you're fortunate enough to own one—as we do—you know how important it is to preserve its original appearance. Whether you're restoring your ACR, completing a fresh paint job, or simply replacing faded or damaged decals, finding genuine Mopar ACR door decals has become nearly impossible since they were discontinued.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTo help keep these rare cars looking factory fresh, we've faithfully recreated the original ACR door decals using premium, long-life, high UV-resistant vinyl manufactured in the USA. Just like the original Mopar decals, our reproductions feature a silver metallic base with a precision die-cut black overlay, accurately duplicating the factory appearance and construction.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eEach set is proudly made in the USA and built to provide years of durability while maintaining the authentic OEM look your ACR deserves.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eExact OEM size and color match.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong data-start=\"1502\" data-end=\"1520\"\u003eSold as a pair\u003c\/strong\u003e (left and right door decals).\u003c\/p\u003e","published_at":"2026-06-25T12:40:40-05:00","created_at":"2026-06-25T12:40:39-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["03-05 Dodge Neon SRT-4-Exterior-Emblems \u0026 Badges"],"variants":[{"id":43895808196686,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"701109-ACR-PAIR","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"25.00","grams":113,"compare_at_price":null,"position":1,"product_id":7953058988110,"created_at":"2026-06-25T12:40:39-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":51865926303822,"created_at":"2026-06-25T12:44:13-05:00","position":1,"updated_at":"2026-06-25T12:44:15-05:00","product_id":7953058988110,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/srt4acrstickers1.jpg?v=1782409455","width":800,"height":800},{"id":51865926369358,"created_at":"2026-06-25T12:44:13-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7953058988110,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/srt4acrstickers2.jpg?v=1788795430","width":800,"height":800},{"id":51865926336590,"created_at":"2026-06-25T12:44:13-05:00","position":3,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7953058988110,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/srt4acrstickers3.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7947807326286,"title":"MPx Stainless Steel Door Sills 00-05 Dodge Neon\/Neon SRT-4","handle":"mpx-stainless-steel-door-sills-00-05-dodge-neon-neon-srt-4","body_html":"\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eWe set out to create the door sill set we always wanted for our beloved Dodge Neon and Neon SRT-4. To ensure there was an option for every enthusiast, we developed three different versions to fit everything from a standard 2000–2005 Neon to the rare 2001–2002 Neon ACR, 2003–2005 Neon SRT-4, and 2005 SRT-4 ACR.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eEach set is proudly made in the USA from premium 18-gauge T304 stainless steel and features a beautiful brushed finish for a clean, OEM-inspired appearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eFor quick and easy installation, genuine 3M automotive-grade adhesive tape is pre-installed on every sill plate.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cspan\u003eAvailable Designs:\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003ePlain Stainless (No Lettering)\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003ePerfect for owners who prefer a clean, understated appearance or for use on any 2000–2005 Dodge Neon.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eSRT-4\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eFeatures the iconic SRT-4 logo laser-cut directly into the stainless steel for an unmistakable performance-inspired look.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e\u003cstrong\u003eACR Package\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eIncludes the Plain Stainless door sill set along with four USA-made die-cut ACR decals, allowing ACR owners to customize the sills to their preference.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"isSelectedEnd\"\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eProtective Film Notice\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cspan\u003eTo prevent damage during shipping and handling, each sill plate is covered with a protective adhesive film. Simply peel away the film before installation. If any adhesive residue remains, it can be easily removed with brake cleaner and a clean, lint-free cloth.\u003c\/span\u003e\u003c\/p\u003e","published_at":"2026-06-18T11:15:17-05:00","created_at":"2026-06-18T11:15:16-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["00-05-neon-interior-gauges","03-05 Dodge Neon SRT-4-Interior \u0026 Gauges-Interior"],"variants":[{"id":43878806945870,"title":"Plain","option1":"Plain","option2":null,"option3":null,"sku":"220500-BLANK-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"99.99","grams":1361,"compare_at_price":null,"position":1,"product_id":7947807326286,"created_at":"2026-06-18T11:21:20-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43878806978638,"title":"SRT-4","option1":"SRT-4","option2":null,"option3":null,"sku":"220500-SRT4-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"119.99","grams":1361,"compare_at_price":null,"position":2,"product_id":7947807326286,"created_at":"2026-06-18T11:21:20-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43878807011406,"title":"Plain with 4 ACR stickers","option1":"Plain with 4 ACR stickers","option2":null,"option3":null,"sku":"220500-ACR-KIT","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"139.99","grams":1361,"compare_at_price":null,"position":3,"product_id":7947807326286,"created_at":"2026-06-18T11:21:20-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":51564079939662,"created_at":"2026-06-18T10:44:52-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt41.jpg?v=1788795430","width":800,"height":800},{"id":51566074658894,"created_at":"2026-06-18T11:29:53-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt45.jpg?v=1788795430","width":800,"height":800},{"id":51564079906894,"created_at":"2026-06-18T10:44:52-05:00","position":3,"updated_at":"2026-06-18T10:44:54-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt42.jpg?v=1781797494","width":800,"height":800},{"id":51564079841358,"created_at":"2026-06-18T10:44:52-05:00","position":4,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt44.jpg?v=1788795430","width":800,"height":800},{"id":51564079972430,"created_at":"2026-06-18T10:44:52-05:00","position":5,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/9ebb5ddc-7e1e-4379-a289-74b877224184.png?v=1788795430","width":1448,"height":1086},{"id":51566074691662,"created_at":"2026-06-18T11:29:53-05:00","position":6,"updated_at":"2026-06-18T11:29:54-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt46.jpg?v=1781800194","width":800,"height":800},{"id":51566074724430,"created_at":"2026-06-18T11:29:53-05:00","position":7,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt47.jpg?v=1788795430","width":800,"height":800},{"id":51566074757198,"created_at":"2026-06-18T11:29:53-05:00","position":8,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt48.png?v=1788795430","width":1254,"height":1254},{"id":51566230274126,"created_at":"2026-06-18T11:32:58-05:00","position":9,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt49.jpg?v=1788795430","width":800,"height":800},{"id":51567648440398,"created_at":"2026-06-18T12:00:57-05:00","position":10,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt410.jpg?v=1788795430","width":800,"height":800},{"id":51568699506766,"created_at":"2026-06-18T12:15:39-05:00","position":11,"updated_at":"2026-09-07T10:38:09-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt411.jpg?v=1788795489","width":800,"height":800},{"id":51568699539534,"created_at":"2026-06-18T12:15:39-05:00","position":12,"updated_at":"2026-09-07T10:38:09-05:00","product_id":7947807326286,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxstainlessdoorsillsnsrt412.jpg?v=1788795489","width":800,"height":800}],"options":[{"name":"Choose","position":1,"values":["Plain","SRT-4","Plain with 4 ACR stickers"]}]},{"id":7909446844494,"title":"MPx Stainless Steel Lower Water Inlet Tube 2.4L Stratus\/PT Cruiser Non Turbo","handle":"water-pump-inlet-pipe-95-05-neon-pt-cruiser-non-turbo","body_html":"\u003cp data-end=\"272\" data-start=\"111\"\u003eMopar has discontinued the OEM water pump inlet pipe for the 2.4L 1995–2000 Dodge Stratus\/Breeze\/Cirrus\/Caravan and non-turbo 2001-2010 PT Cruiser, making replacements increasingly difficult to source.\u003c\/p\u003e\n\u003cp data-end=\"272\" data-start=\"111\"\u003e \u003c\/p\u003e\n\u003cp data-end=\"637\" data-start=\"274\"\u003eTo help keep these vehicles on the road, we developed a direct replacement water pump inlet pipe. Rather than reproducing the original painted mild steel design, we chose to manufacture ours from stainless steel. Stainless steel offers significantly better corrosion resistance than mild steel, helping provide improved longevity and durability over the OEM part.\u003c\/p\u003e\n\u003cp data-end=\"637\" data-start=\"274\"\u003e \u003c\/p\u003e\n\u003cp data-end=\"782\" data-start=\"639\"\u003eThis inlet pipe is designed to work with the OEM water pump inlet seal and installs to the engine block exactly like the original factory pipe.\u003c\/p\u003e\n\u003cp data-end=\"782\" data-start=\"639\"\u003e \u003c\/p\u003e\n\u003cp data-end=\"793\" data-start=\"784\"\u003e\u003cstrong data-end=\"793\" data-start=\"784\"\u003eFits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-end=\"1064\" data-start=\"795\"\u003e\n\u003cli data-end=\"995\" data-start=\"864\" data-section-id=\"1ihiiw0\"\u003e1995–2000 2.4L \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eDodge Stratus\u003c\/span\u003e\u003c\/span\u003e \/ \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003ePlymouth Breeze\u003c\/span\u003e\u003c\/span\u003e \/ \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eDodge Caravan\u003c\/span\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"1064\" data-start=\"996\" data-section-id=\"1stz5ja\"\u003e2001–2010 2.4L \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eChrysler PT Cruiser\u003c\/span\u003e\u003c\/span\u003e non-turbo models\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-end=\"1095\" data-start=\"1066\"\u003e \u003c\/p\u003e\n\u003cp data-end=\"1095\" data-start=\"1066\"\u003e\u003cstrong data-end=\"1095\" data-start=\"1066\"\u003eAdditional compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-is-only-node=\"\" data-is-last-node=\"\" data-end=\"1391\" data-start=\"1097\"\u003eFor 2003–2005 \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eDodge Neon SRT-4\u003c\/span\u003e\u003c\/span\u003e and \u003cspan class=\"hover:entity-accent entity-underline inline cursor-pointer align-baseline\"\u003e\u003cspan class=\"whitespace-normal\"\u003eChrysler PT Cruiser Turbo\u003c\/span\u003e\u003c\/span\u003e applications, this pipe can also be used when running an aftermarket turbocharger that does not require water cooling. In those setups, it provides a convenient smaller water feed for the heater core.\u003c\/p\u003e","published_at":"2026-05-14T13:18:02-05:00","created_at":"2026-05-14T13:18:01-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["01-10 Chrysler PT Cruiser - PT Cruiser Non-Turbo-Engine -Cooling System","95-05 Dodge-Plymouth Neon-00-05 Neon-Engine-Cooling System","95-05 Dodge-Plymouth Neon-95-99 Neon-2.0L Engine Components-Cooling System"],"variants":[{"id":43748074160206,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221156-SS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"119.99","grams":454,"compare_at_price":null,"position":1,"product_id":7909446844494,"created_at":"2026-05-14T13:18:01-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":50006117777486,"created_at":"2026-05-14T13:09:23-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7909446844494,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/nawaterpumpinletpipe5.jpg?v=1788795430","width":800,"height":800},{"id":50006117810254,"created_at":"2026-05-14T13:09:23-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7909446844494,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/nawaterpumpinletpipe6.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7908915314766,"title":"Front Engine Mount, 95-99 Neon","handle":"front-engine-mount-95-99-neon","body_html":"\u003cp\u003e\u003cstrong\u003eMopar has discontinued the OEM mount on May 14, 2024. We do not have anymore left!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is an aftermarket front engine mount replacement for the 95-99 Dodge\/Plymouth Neons. Fits all Neons, regardless of automatic transmission, manual transmission, SOHC engine, DOHC engine.\u003c\/p\u003e","published_at":"2026-05-13T14:08:38-05:00","created_at":"2026-05-13T14:08:37-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["95-05 Dodge-Plymouth Neon-95-99 Neon-2.0L Engine Components-Engine Mounts"],"variants":[{"id":43745811955790,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"221149","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"39.99","grams":1361,"compare_at_price":null,"position":1,"product_id":7908915314766,"created_at":"2026-05-13T14:08:37-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":49969512644686,"created_at":"2026-05-13T14:05:18-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7908915314766,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/208_6525_popup.jpg?v=1788795430","width":720,"height":479}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7904010600526,"title":"Tial TLS Q Blow off Valve","handle":"tial-tls-q-blow-off-valve","body_html":"\u003cp\u003eTial's 50mm Q Series BOV flows 60% more than its predecessor, making it the highest flowing 50mm BOV on the market, and bolts to any standard TiAL flange without welding.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAn included Aluminum weld mounting flange cut for 2-1\/2'' pipe and CNC machined aluminum V-band mounting clamp with stainless steel hardware create a durable corrosion-free appearance.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eA banjo-type aluminum air fitting and bolt with 1\/4\" hose barb allow quick actuator response.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eTechnical Specifications:\u003cbr\u003eFor use on turbo-charged and super-charged applications (Paxton, Vortec, etc.) The body and all internal components of the blow off valve are CNC machined from aluminum alloy. It features a large 1.98'' (50.5mm) valve.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe V-Band design aluminum mounting clamp gives a very clean and unique appearance. The clamp uses Stainless Steel hardware for a long lasting, corrosion-free appearance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe valve seal utilizes a high temperature resistant o-ring that is clamped in place to prevent the possibility of sticking to the seat and pulling out. The valve stem and guide are hard anodize-coated for wear resistance.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe Blow Off Valve also comes with a machined aluminum banjo-type air fitting and bolt, with oversized 10mm hose barb for quick actuator response. The actuator has a high temp silicone reinforced diaphragm for long life.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAn aluminum weld base mounting flange is furnished with each unit\u003cbr\u003eThrough countless hours of R\u0026amp;D Tial was able to make the same size valve flow a staggering 60% more than the original design - that means 60% more air is blown off per cycle!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is the highest flowing BOV on the market\u003cbr\u003eA single Q BOV can support up to 1,800hp\u003cbr\u003eAnodized aluminum color options (Silver, Red, Blue, Purple, Black)\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003eThese blow off valves have a 10lb spring, to easily handle upwards of 25-35 psi of boost.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","published_at":"2026-05-07T14:46:01-05:00","created_at":"2026-05-07T14:46:00-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["01-10 Chrysler PT Cruiser-03-10 PT Cruiser Turbo-Turbo Upgrades \u0026 Accessories","03-05 Dodge Neon SRT-4 -Turbo Upgrades \u0026 Accessories-Blow Off Valves \u0026 Adapters","05-10 Chevrolet Cobalt -SS Turbocharged -Turbo Accessories","08-10 Chevrolet HHR SS-Turbo Accessories","13-18 Ford Focus ST Turbo Accessories"],"variants":[{"id":43730005622862,"title":"Purple","option1":"Purple","option2":null,"option3":null,"sku":"601146-6","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"278.95","grams":726,"compare_at_price":null,"position":1,"product_id":7904010600526,"created_at":"2026-05-07T15:54:30-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43730005655630,"title":"Silver","option1":"Silver","option2":null,"option3":null,"sku":"601146-5","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"278.95","grams":726,"compare_at_price":null,"position":2,"product_id":7904010600526,"created_at":"2026-05-07T15:54:30-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43730005688398,"title":"Red","option1":"Red","option2":null,"option3":null,"sku":"601146-3","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"278.95","grams":726,"compare_at_price":null,"position":3,"product_id":7904010600526,"created_at":"2026-05-07T15:54:30-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43730005721166,"title":"Blue","option1":"Blue","option2":null,"option3":null,"sku":"601146-4","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"278.95","grams":726,"compare_at_price":null,"position":4,"product_id":7904010600526,"created_at":"2026-05-07T15:54:30-05:00","updated_at":"2026-10-18T16:21:49-05:00"},{"id":43730005753934,"title":"Black","option1":"Black","option2":null,"option3":null,"sku":"601146-1","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"278.95","grams":726,"compare_at_price":null,"position":5,"product_id":7904010600526,"created_at":"2026-05-07T15:54:30-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":49693148315726,"created_at":"2026-05-07T15:27:04-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7904010600526,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/tialbov5.jpg?v=1788795430","width":800,"height":800},{"id":49693148348494,"created_at":"2026-05-07T15:27:04-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7904010600526,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/redtialbov7.jpg?v=1788795430","width":800,"height":800},{"id":49693148381262,"created_at":"2026-05-07T15:27:04-05:00","position":3,"updated_at":"2026-09-07T10:37:11-05:00","product_id":7904010600526,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/redtialbov6.jpg?v=1788795431","width":800,"height":800},{"id":49693148414030,"created_at":"2026-05-07T15:27:04-05:00","position":4,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7904010600526,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/redtialbov5.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Choose","position":1,"values":["Purple","Silver","Red","Blue","Black"]}]},{"id":7903495815246,"title":"ARP CA625+ Head Stud Kit 08-09 Caliber SRT-4","handle":"arp-ca625-head-stud-kit-08-09-caliber-srt-4","body_html":"\u003cp\u003eIf you have plans to make serious power, ie - over 550+whp, consider the best and strongest head studs available! That's where these ARP CA625+ Alloy Head studs come into play.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eARP Custom Age 625+ cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. These ARP CA625+ kits come with 10 oversized 1\/2 wrenching 12-point nuts, 10 CA625+ studs, 10 hardened parallel washers for an even load distribution and accurate torque readings, ARP Ultra-Torque Fastener Assembly lubricant, and installation instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eCustom Age 625 Plus: This newly formulated super-alloy demonstrates superior fatigue cycle life, tensile strength and toughness - with complete resistance to atmospheric corrosion and oxidation. ARP is the first to develop manufacturing and testing processes for fasteners with Custom Age 625+. Typical tensile strength is 260,000-280,000 psi.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eARP fastener kits are all made in the USA!\u003c\/p\u003e","published_at":"2026-05-06T13:04:03-05:00","created_at":"2026-05-06T12:13:41-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["08-09 Dodge Caliber SRT-4-Engine-Studs \u0026 Hardware"],"variants":[{"id":43727975579726,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"223185-625","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"469.99","grams":1588,"compare_at_price":null,"position":1,"product_id":7903495815246,"created_at":"2026-05-06T12:13:41-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":49639533150286,"created_at":"2026-05-06T12:58:33-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7903495815246,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/arp625calibersrt45.jpg?v=1788795430","width":800,"height":800},{"id":49639533117518,"created_at":"2026-05-06T12:58:33-05:00","position":2,"updated_at":"2026-09-07T10:37:11-05:00","product_id":7903495815246,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/arp625calibersrt46.jpg?v=1788795431","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7903498862670,"title":"AGP Oil Feed Line 08-09 Caliber SRT-4","handle":"agp-oil-feed-line-08-09-caliber-srt-4","body_html":"\u003cp\u003eMopar discontinued the OEM oil feed line, so AGP made this line for the Caliber SRT4 community to keep our cars on the road! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is a replacement turbo oil feed line for the stock turbo and big wheel stocker units. We recommend replacing the oil feed line any time you are installing a new turbo. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eFits all 2008-2009 Caliber SRT-4's. \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThese are assembled in the USA. \u003c\/p\u003e","published_at":"2026-05-06T12:26:35-05:00","created_at":"2026-05-06T12:15:38-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":43727984853070,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"223127-TD04-OILS","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"64.99","grams":454,"compare_at_price":null,"position":1,"product_id":7903498862670,"created_at":"2026-05-06T12:15:38-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":49637949538382,"created_at":"2026-05-06T12:19:29-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7903498862670,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/agpcaliberoilfeedline5.jpg?v=1788795430","width":800,"height":800},{"id":49637949505614,"created_at":"2026-05-06T12:19:29-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7903498862670,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/agpcaliberoilfeedline6.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7903390957646,"title":"Aeroforce Dart Faceplate","handle":"aeroforce-dart-faceplate","body_html":"\u003cp\u003e\u003cspan\u003eIf you own a 2013+ Dodge Dart with Aeroforce Scan Gauge system, this is a cool option for you!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis sold seperately gauge faceplate eliminates the text that says Aeroforce and replaces it with the signature Dart logo.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis faceplate is easily swapped, simply unscrew the outer bezel on the Aeroforce gauge, pull the clear lense off and then remove the factory faceplate, swap with this and reassemble.\u003c\/p\u003e","published_at":"2026-05-06T09:31:47-05:00","created_at":"2026-05-06T09:31:46-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":[],"variants":[{"id":43727507193934,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"226504-DART","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"12.00","grams":227,"compare_at_price":null,"position":1,"product_id":7903390957646,"created_at":"2026-05-06T09:31:46-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":54902196437070,"created_at":"2026-08-26T16:00:23-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7903390957646,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/aeroforcedartface_fa8d8dbe-5a51-49cf-b3b3-edd062bbe374.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]},{"id":7899528593486,"title":"MPx Intermediate Shaft Bearing housing with ARP studs 03-05 Neon SRT-4","handle":"mpx-intermediate-shaft-bearing-housing-with-arp-studs","body_html":"\u003cp\u003eWhen Mopar discontinued the intermediate shaft for the Neon SRT-4, they didn’t just kill a part—they created a problem. No replacement bearing, no service option… just the hope that you could track down a worn-out used shaft.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eAfter developing our complete intermediate shaft with replacement bearing, several people asked us to sell the bearing separately on Facebook. So, here it is! \u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eMachined from high-grade billet aluminum and finished in a durable silver anodizing, this housing is built to handle real-world abuse while maintaining a clean, OEM+ appearance. Each unit comes fully equipped with ARP studs, extra-thick washers, and tall flanged nuts for maximum clamping strength and reliability.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe're also using a high-quality bearing with the same inner diameter as the OEM unit, but with a 15% larger outer diameter for increased load capacity, improved durability, and extended service life. The larger bearing design also reduces deflection and offers greater resistance to shock loads.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe MPx intermediate shaft bearing is designed to be pressed onto your OEM intermediate shaft and is fully compatible with the factory bearing bracket.\u003c\/p\u003e","published_at":"2026-04-30T14:57:50-05:00","created_at":"2026-04-30T14:26:54-05:00","updated_at":"2026-10-18T16:21:49-05:00","vendor":"Modern Performance","product_type":"","tags":["03-05 Dodge Neon SRT-4-Drivetrain -Axles"],"variants":[{"id":43712550273102,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"220179-BEARING-K","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"price":"119.99","grams":907,"compare_at_price":null,"position":1,"product_id":7899528593486,"created_at":"2026-04-30T14:26:54-05:00","updated_at":"2026-10-18T16:21:49-05:00"}],"images":[{"id":49349355143246,"created_at":"2026-04-30T14:26:17-05:00","position":1,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7899528593486,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxintermediateshaftbearing5.jpg?v=1788795430","width":800,"height":800},{"id":49349355110478,"created_at":"2026-04-30T14:26:17-05:00","position":2,"updated_at":"2026-09-07T10:37:10-05:00","product_id":7899528593486,"variant_ids":[],"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0688\/2902\/0238\/files\/mpxintermediateshaftbearing6.jpg?v=1788795430","width":800,"height":800}],"options":[{"name":"Title","position":1,"values":["Default Title"]}]}]}