Mopar has discontinued this intake, however we have a few left. If you want to get one, please don't delay as these wont last long!
If you own a 2013-2014 Dodge Dart with 1.4 turbo engine and want better gas mileage, and more power/torque, this air intake from Mopar will help big time!
Mopar has utilized three methods to increase your Darts performance nicely with this intake
Smooth bends, and inner walls provide ultra low restriction for air movement.
Plastic construction rejects heat better than all other materials and wont collapse like silicone pieces under vacuum.
Utilizes the factory lower duct that goes from the bottom of the airbox to the front bumper. This provides a flow of fresh cool outside air.
These three steps will increase your Darts performance with over 10 hp and lower intake temps compared to other intakes on the market.
This intake uses a high flow dry filter that can be easily cleaned and reused dozens of times with no problems.
Its easily installed with simple hand tools, you do not need to remove your bumper to install this. Installation instructions are provided.
For those of you living in California with the ultra restrictive CARB testing, this intake is approved for use in California by the CARB (California Air Research Board) and has a CARB number of D-265-43.
Fits 2013 and 2014 Darts with 1.4 liter motors. Will not fit the 2015+ Darts with 1.4's unless you install a vacuum tee to convert the two vacuum connections from the engine to the single vacuum port on this intake.
The Dart front end has a plastic under tray that protects the filter from water, and dirt, so you don't have to worry about water ingestion or dirt exposure.
