MPx Stainless Steel Turbo/Heater Core Coolant Tubes 03-05 Neon SRT-4 / 03-07 PT Cruiser GT

Around 2020, Mopar discontinued the OEM coolant tubes for the 03-05 Neon SRT-4 and 03-07 PT Cruiser GT.

Because we are committed to the 2.4 Turbo Neon SRT-4 and PT/GT community, we started to pursue making our own replacements. Its taken a few years, and many test fits/revisions but we have finally perfected the look and angles of the OEM coolant tubing. We spent a lot of effort to match the factory angles, and include tabs for the wiring harness for a perfect replacement.

We did not want to make a set of tubing in the mild steel like the OEM tubes, because those will just rust and corrode over time, so we made these in stainless steel tubing. Not only do they look fantastic but they will last a lot longer.

You can install these with the standard finish, or you can polish them for a higher glossy finish. Or if you want a more OEM, flat black look you could paint/powdercoat them. Your choice.

These are a perfect replacement for use with the OEM turbo, Mopar stage 3 turbo, Big Wheel Stockers, and any other water cooled turbo.

In the past, when we discussed this item on our Facebook group some of you guys asked if we could delete the nipples for oil cooler/water feed for turbo. We are not offering that at this point, but may consider that in the future. If you are not using a water cooled turbo or don't want to use the water outlets on these for your turbo/oil cooler, feel free to block off the water passages. The 45 degree nipple near the engine hoist bracket feeds the turbo, and the 30 degree fitting near the firewall feeds the oil cooler.

These fit the following vehicles:

-2003-2005 Dodge Neon SRT-4
-2003-2007 Chrysler PT and GT Cruisers with 2.4 turbo motors.

Other items that go well with these Turbo/Heater core tubing:

We have perfect fit, 3 ply super strong silicone hoses for the supply side of our MPx Stainless Turbo/Heater core hoses.